Price my fence in 60 seconds.

Get an instant estimate

Aurora, CO · Arapahoe County

East-metro fences. Tell us where to send it, then a price before the HOA packet comes out.

Aurora stretches from older grids near Havana to wide new tracts out by Murphy Creek and Southlands. Utility easements and design guidelines show up more often here than on a Denver alley.

Vetted and insured · 24/7 FenceOwl support

We only work with family-owned American companies. We believe they offer the best service at the best prices.

Contractors are licensed where the city requires it. Colorado does not license fence contractors statewide.

Illustrated fence used on the Aurora page

Neighborhoods on this page

Heather Ridge · Saddle Rock · Murphy Creek · Central Aurora · Southlands

Every crew is vetted and insured.

And FenceOwl stays with you around the clock until the fence is finished. We're here to be your advocate and spokesperson with the contractor, and to make sure the whole process goes smoothly. These are company promises, not a contractor slogan.

  • Vetted

    Every contractor is reviewed by FenceOwl before they can buy a job.

  • Insured

    Liability insurance is required on every crew we match.

  • 24/7 support

    FenceOwl stays on the line with you, day or night, until the project is done.

One price

We take the negotiation out of hiring a fence contractor.

Answer a few quick questions, tell us where to send it, and see your price right away. Pre-vetted contractors already compete in the book, so the number you see is the price. No haggling. No back-and-forth bids.

You should not spend a weekend comparing Aurora bids that all move after the site walk. After you tell us where to send it, the competitive price is the one on the quote.

Verify with the city

Aurora height, setback, permit, and HOA notes

Confirm height, setbacks, permits, and HOA standards with your city and your association before anyone orders materials.

Front yard
Front yards are commonly limited to about 4 ft.
Side and rear
Side and rear yards are commonly limited to about 6 ft.
Setback
Fences are often built on the line, but a utility easement can push the fence in. Read the plat.
Permit
Aurora expects a permit for most new residential fences.
HOA
Master associations are common east of E-470 and in many south Aurora filings. Central Aurora is more mixed.

Also serves nearby: Centennial, Foxfield, Parker. Searching one of those addresses recenters the map. The lead still counts under Aurora.

Weather on this fence

What the climate asks of a Aurora fence

The east side of the metro is open to plains wind and to hail that marches up I-70. Snow load is moderate. The bigger wear is sun on south and west runs and grit blown against the lower boards.

Materials that fit

Vinyl privacy is popular where an HOA wants a uniform color that does not chalk. Cedar still fits older central lots. Check the plat for an easement before you fall in love with a line drawn on the satellite photo.

The $ budget tier

These crews are carefully vetted for quality work and craftsmanship, but they use cheaper materials that don't carry a warranty and they won't warranty the work either. The product is good for an under 10 year timeline. Everyone still carries the necessary insurance and any license their city requires. Contractors at this tier may not accept credit cards or offer financing.

Fence styles for a Aurora lot

Cedar dog-ear is the standard option. Craftsman cedar is the upgraded privacy style, on the higher budgets. Chain link is galvanized or black vinyl-coated, at 4 ft, 5 ft, and 6 ft, with the same walk and drive gates. Wood picket, vinyl, composite, aluminum, iron, and custom include 4 ft, 5 ft, and 6 ft. Split rail is an open wood post-and-rail fence, about 4 ft as 2-rail or 3-rail, with optional wire mesh. Answer a few quick questions, tell us where to send it, and see your price right away.

  • Wood

    Cedar dog-ear privacy

    Cedar privacy fence with dog-ear tops.

    Estimate this in Aurora
  • Wood

    Craftsman cedar

    Premium cedar privacy. The upgraded board, cap, and finish.

    Estimate this in Aurora
  • Wood

    Wood picket

    Spaced pickets for a front yard. Marks the line and still lets the yard breathe.

    Estimate this in Aurora
  • Vinyl

    Vinyl privacy

    Solid panels that stay bright and skip the restain weekend.

    Estimate this in Aurora
  • Vinyl

    Vinyl semi-privacy

    Boards with a gap. Light gets through, and the yard still feels enclosed.

    Estimate this in Aurora
  • Composite

    Composite

    Capped boards in Trex and similar composites. The dressed-up look without a stain schedule.

    Estimate this in Aurora
  • Aluminum

    Aluminum

    Ornamental black aluminum. Open bars, a finished metal look, and nothing to restain.

    Estimate this in Aurora
  • Iron

    Iron (ornamental)

    Wrought-iron style bars with scrolls and finials. Heavier than aluminum, and priced above it.

    Estimate this in Aurora
  • Wood

    Split rail

    Rustic wood post-and-rail. Open, so you can see through it. Common on acreage and along property lines.

    Estimate this in Aurora
  • Chain link

    Galvanized chain link

    Silver galvanized mesh. The standard chain link finish.

    Placeholder photo

    Estimate this in Aurora
  • Chain link

    Black vinyl-coated chain link

    Black vinyl-coated mesh. The upgraded chain link finish.

    Placeholder photo

    Estimate this in Aurora
  • Custom

    Custom

    Ranch wire, or a mix that is not one of the preset styles. Tell us what you actually want built.

    Estimate this in Aurora

How a Aurora estimate moves

  1. 01

    Address, fence, style, and budget

    Search the address, click each corner of the fence line on the satellite photo, and watch the footage update. Choose height, gates, a style, and a $, $$, or $$$ tier. No price is shown yet.

  2. 02

    Tell us where to send it

    A few questions cover timeline, whether you own or rent, HOA, and whether this is a new fence, a replacement, or a repair. Then your name, email, and phone.

  3. 03

    Your price, right away

    The range and the itemized quote show on the next screen, and a copy is emailed. You can book a visit when the job matches. FenceOwl support stays available 24/7. You do not pay on the site.

The map opens centered on Aurora with satellite imagery and street labels. Your street address recenters it. A line on that photo is not the property line: the contractor confirms it from a survey or plat and calls 811 before digging. The contractor desk records this city funnel on the lead.

Aurora questions

Why do Aurora estimates talk about easements?

A lot of Aurora plats reserve a strip for utilities along the rear or side. These notes say the fence may have to step in. The contractor confirms that on the plat, not from the satellite sketch.

Can the HOA pick the color after FenceOwl prices the job?

The price follows the style and tier you chose. If an association requires a specific vinyl color, say so in the custom note or at the visit so the material line matches the approval.

Is Southlands priced like central Aurora?

The map centers on Aurora and pricing covers the city. The matched crew still has to serve that part of town. The lead records that you started on the Aurora page.

Instant estimate

Start on the Aurora map

Enter the property. The satellite view opens on Aurora until the address recenters it.

Answer a few quick questions, tell us where to send it, and see your price right away. The price is on the next screen after your name, email, and phone.

More cities are on the areas page. This page is /co/aurora.